Dry Rod Dehumidifier

Prevent moisture and mold from entering your Liberty Safe with a gun safe dehumidifier rod. We carry 12 and 18 inch dehumidifiers for your home or gun safe.

📦 Free Shipping on Accessory Orders $50+
*Free standard shipping on accessory orders $50 or more is only available in the contiguous 48 U.S
Regular price$20.99
/
Shipping calculated at checkout.

Full Description

Dehumidifiers heat to a surface temperature of around 100-120 degrees F. The heat creates a natural convection that slowly circulates warm, dry air throughout an enclosure on a 24-hour basis. This increases the temperature of the air inside to several degrees above the ambient outside temperature. Expansion of the heated air forces the moist air outside through the small cracks on safe doors leaving the dry air inside. It is best utilized when mounting horizontally at the bottom of the safe to work effectively. The Liberty gun safe dehumidifier rod can be mounted against a wall as well. Lowering the humidity is a slow process. If you do not see a reduction of humidity after a couple of weeks then you may want to consider a longer unit or our PEET dehumidifier.

In order to plug in this electrical gun cabinet dehumidifier inside your safe, we recommend purchasing the electrical outlet kit. The electrical outlet kit comes standard on all Franklin gun safes and higher.

Customer Reviews

Based on 27 reviews
11%
(3)
22%
(6)
7%
(2)
0%
(0)
59%
(16)
L
Lawrence M.

I’m not sure to tell if it’s working. Should it be warm to the touch?

Hi, yes it warms up to warm the air in your safe.

K
KCKS
Easy installation and no maintenance

I bought this with the Liberty's Centurion 12, along with the electrical outlet kit for the safe. installation was simple, easy to follow instructions. I bought this for ease of use and no worries. It works as advertised, I have a simple wireless humidity/temp thermometer and for over a year now it has done just fine. All items are kept at an adequate temperature and humidity. The rod does get slightly warm to touch, but nothing to be concerned. I keep steel, wood, brass, and electronics in the safe, and everything is good as new.

K
KCKS
Easy installation and no maintenance

I bought this with the Liberty's Centurion 12, along with the electrical outlet kit for the safe. installation was simple, easy to follow instructions. I bought this for ease of use and no worries. It works as advertised, I have a simple wireless humidity/temp thermometer and for over a year now it has done just fine. All items are kept at an adequate temperature and humidity. The rod does get slightly warm to touch, but nothing to be concerned. I keep steel, wood, brass, and electronics in the safe, and everything is good as new.

M
Mike
Dry Rod runs hot?

Is this supposed to run Hot? I can still touch it and pick it up without burning myself but was wondering if this is normal?

Yes, it should maintain a constant temp of around 75°

M
Mike
Dry Rod runs hot?

Is this supposed to run Hot? I can still touch it and pick it up without burning myself but was wondering if this is normal?

B
Brian
Screws to short

The screws for the 2 mounting plastic brackets are to short they barely go through the fuzz on the liberty fat boy. It seems to work so far have had it 2 days. I used pipe hanging brackets and longer screws to double secure it. It will not fall off now.

B
Brian
Screws to short

The screws for the 2 mounting plastic brackets are to short they barely go through the fuzz on the liberty fat boy. It seems to work so far have had it 2 days. I used pipe hanging brackets and longer screws to double secure it. It will not fall off now.

p
ppayne
model 9913

Note: if your dehumidfier quits working, take a pair of pliers and pull plug apart. The wires just plug on to two needles. Picking them up by the cord, it pulls out a little, simply cut the wire off a little and plug it back in. Paul W. P. ps. I threw one away, could be warmer.


Recently viewed